What does TPMS mean for construction vehicle tires?
TPMS (Tire Pressure Monitoring System) for construction vehicle tires is a system that monitors tire pressure and temperature in real time, which is used to improve vehicle safety, reduce the risk of tire damage, and improve fuel efficiency. TPMS is particularly important on heavy equipment and construction vehicles (such as mining trucks, excavators, loaders, etc.) because these vehicles often operate under extreme conditions and the performance of tires is critical to safety and operating efficiency.
Functions and roles of TPMS:
1. Real-time monitoring of tire pressure:
- The TPMS system continuously monitors the air pressure in the tire through sensors installed on each tire. If the air pressure is lower or higher than the preset standard value, the system will issue a warning to remind the driver to take action.
- This helps to avoid tire blowouts and excessive wear caused by low tire pressure, or reduced grip and tire overheating caused by high tire pressure.
2. Real-time monitoring of tire temperature:
- In addition to air pressure, TPMS also monitors tire temperature. When construction vehicles are working for a long time or driving under high temperature and harsh road conditions, tires are prone to overheating, increasing the risk of failure. Temperature monitoring can help operators detect potential problems in advance and prevent tire failures or fire accidents.
3. Improve fuel efficiency:
- Low tire pressure will increase the rolling resistance of the tire, resulting in increased fuel consumption. The TPMS system can help ensure that the tire is always in the optimal pressure range, thereby reducing fuel consumption and improving the economy of the vehicle.
4. Extend tire life:
- By maintaining the correct tire pressure and monitoring tire temperature, TPMS can significantly reduce tire wear and extend tire life, thereby reducing the frequency of tire replacement and reducing maintenance costs.
5. Improve safety:
- When engineering vehicles are operating in harsh environments, problems with tires may cause equipment to lose control or even cause serious safety accidents. TPMS can detect problems early, prevent potential dangers, and ensure operational safety.
How TPMS works:
The TPMS system usually consists of sensors installed in the tire, a central control module, and a display device. The sensor measures the air pressure and temperature in the tire and transmits the data to the driver's display or warning system via wireless signals. If the air pressure or temperature exceeds the normal range, the system will issue a warning to allow the operator to take timely measures.
Importance of TPMS on engineering vehicles:
Engineering vehicles usually work under heavy loads, complex terrain and harsh weather conditions, and tire pressure and temperature management is critical. The TPMS system can help operators better monitor tire status and reduce the risk of unexpected downtime, tire damage or safety accidents, especially in mines, construction sites and other places where equipment operation requirements are extremely high.
In summary, TPMS plays a vital role in engineering vehicle tire management, helping to improve safety, optimize performance and reduce operating costs.
TRACTION's rims have been strictly verified by the main engine customers. Now in the global market, TRACTION's rims have covered the fields of industry, agriculture, mining, construction equipment, etc. TRACTION has extensive and loyal partners in the global market.
At the same time, we also provide OTR tires for the global market. We also produce a lot of tires of different specifications for engineering machinery vehicles that use OTR tires more. Among them, the 26.5-25 solid tires provided by our company for Hitachi ZW310 loaders have been unanimously recognized by customers.
TRACTION brand 26.5-25 solid tire for Hitachi ZW310 loader
The 26.5-25 solid tire is matched with the 22.00-25/3.0 rim
26.5-25 solid tire: This is the size specification of the tire. 26.5-25 refers to the diameter (inch) and width (inch) of the tire.
22.00-25 rim: This is the size specification of the rim. It refers to the diameter and width of the rim. In this case, 22.00-25 means that the rim is 22 inches wide and 25 inches in diameter.
This combination is suitable for heavy equipment such as medium to large loaders.
What are the advantages of Hitachi ZW310 Loader Solid Tires?
The use of solid tires (also known as airless tires) for Hitachi ZW310 loaders has many advantages in specific operating environments, especially in working conditions that require high durability and puncture resistance. Solid tires have the following significant advantages over traditional pneumatic tires:
1. Strong puncture resistance
No risk of blowout: Solid tires have no air pressure and will not be punctured by external sharp objects (such as nails, glass or stones), which is particularly suitable for operations under harsh conditions such as sharp gravel, waste piles, metal fragments, etc.
Reduce downtime: Using solid tires can avoid unexpected downtime caused by blowouts or tire leaks, especially in complex environments such as mining, waste disposal or construction sites, ensuring continuous operation and improving production efficiency.
2. Longer service life
High wear resistance: The rubber thickness of solid tires is thicker than that of ordinary tires, and they are highly wear-resistant and can withstand longer wear. Therefore, their service life is usually much longer than that of pneumatic tires, reducing the frequency of tire replacement.
Suitable for heavy-duty operations: In heavy-duty operations, solid tires can withstand greater loads without deformation, which is especially important for heavy equipment such as loaders, and can maintain the stability of the tires.
3. Better stability
Anti-rollover performance: Solid tires have a sturdy structure and will not cause the risk of vehicle rollover due to unstable air pressure like pneumatic tires. Solid tires can provide better balance and safety when the loader is performing high-intensity operations, carrying heavy objects, or working on uneven ground.
Reduce sway: Solid tires have a higher hardness and are less sensitive to road surface changes during driving, so when operating on bumpy roads, the vehicle sways less, providing a more stable operating experience.
4. Low maintenance cost
No need to check air pressure frequently: Since there is no air pressure problem, solid tires reduce the need to monitor tire pressure and reduce the workload of daily maintenance.
Low replacement frequency: Solid tires have a longer service life than pneumatic tires, reducing the cost and frequency of tire replacement, which has significant economic benefits for long-term equipment operations.
5. Suitable for harsh working environments
Solid tires are particularly suitable for use in harsh working environments where pneumatic tires are easily damaged, such as quarries, mines, waste disposal sites, construction sites, etc. They can be used continuously in complex road conditions such as gravel, glass fragments, metal shavings, etc., and are not easily affected by external conditions.
6. Increased load capacity
Due to the stronger structure of the solid tire, it can withstand a larger load and is suitable for heavy loaders such as the Hitachi ZW310 when working under high load. This allows the equipment to carry more materials and improve work efficiency.
7. Stability and comfort
Although the solid tire has a higher hardness, modern technology enables solid tires to have better vibration absorption, reduce the fatigue of operators under harsh working conditions, and improve the comfort of operation.
Applicable scenarios
Hitachi ZW310 loader uses solid tires that are very suitable for the following environments:
Mining and quarrying: An environment full of gravel and sharp objects, which can easily cause damage to pneumatic tires.
Waste treatment and recycling plants: The ground is full of sharp objects such as glass and metal fragments, and solid tires are puncture-resistant and more adaptable.
Construction sites: Usually the road conditions are complex and the ground is uneven, and solid tires provide better stability and load capacity.
Heavy industry and port operations: environments that require long hours and high loads, solid tires reduce downtime and improve efficiency.
The main advantage of using solid tires for Hitachi ZW310 loaders is their excellent puncture resistance, wear resistance and longer service life, while providing better stability and safety in complex and harsh operating environments. For users who need to continue to work efficiently in harsh environments, solid tires are undoubtedly a more economical, efficient and safe choice.
The TRACTION brand tires were born in 2023. In order to meet the market demand for 25-inch solid tires, TRACTION developed its own brand of solid tires in 2023. Our company is one of the few companies that produces both rims and solid tires. We can provide tire + Rim Assembly solutions. The product specifications are as follows.
| Solid tire size | Wheel rim size |
| 16.00-25 | 11.25-25 |
| 17.50-25 | 14.00-25 |
| 18.00-25 | 13.00-25 |
| 20.50-25 | 17.00-25 |
| 23.50-25 | 19.50-25 |
| 26.50-25 | 22.00-25 |
| 29.50-25 | 24.00-25 |
The quality of all our products has been recognized by global OEMs such as Caterpillar, Volvo, Liebherr, Doosan, John Deere, Linde, BYD, etc.
Our products have world-class quality.
