What are wheel loaders suitable for?
Wheel loaders are a common type of construction machinery that is suitable for a variety of uses, including:
1. Earthworks: used to shovel and move soil, sand and gravel, and are widely used in infrastructure and road construction.
2. Material handling: various bulk materials such as cement, coal and ore are handled in construction sites, warehouses and factories.
3. Stacking and unloading: can be used to stack materials and unload materials from one place to another.
4. Cleaning and leveling: used to clean up debris and level the ground during site preparation and cleaning work.
5. Agricultural use: can be used to carry feed, fertilizer and other materials on farms.
6. Other special operations: by replacing attachments (such as grabs, forklifts, etc.), it can adapt to different operating needs, such as waste disposal, mining operations, etc.
It is usually equipped with a large bucket that can be used to shovel, move and unload soil, sand, gravel, coal and other materials.
Wheel loaders have the following characteristics:
1. Wheel travel: It travels by wheels, suitable for working on flat or hard ground, and is flexible to move.
2. Versatility: Different attachments can be replaced, such as forklifts, grabs, etc., to adapt to a variety of work needs.
3. High efficiency: It can quickly complete loading and handling tasks and improve work efficiency.
4. Cab: It is usually equipped with a comfortable cab to improve the operator's field of vision and comfort.
Wheel loaders are widely used in construction sites, mines, ports and other places where material handling is required. Due to their flexibility and versatility, wheel loaders have been widely used in various industries.
We are China's No. 1 off-road wheel designer and manufacturer, and also the world's leading expert in rim component design and manufacturing. All products are designed and produced according to the highest quality standards, and we have more than 20 years of wheel manufacturing experience. We are the original rim supplier in China for well-known brands such as Volvo, Caterpillar, Liebherr, and John Deere.
The wheel loader rims produced by our company are widely used in many countries. Among them, the size of the rim installed on Volvo Wheel Loaders is 25.00-25/3.5, which is unanimously recognized by customers.
"25.00-25/3.5" is the rim (wheel rim) specification, which is usually used for heavy machinery such as large wheel loaders and mining vehicles.
The specific meanings are as follows:
1. 25.00: refers to the width of the tire, in inches, indicating that the cross-sectional width of the tire is 25.00 inches.
2. 25: refers to the diameter of the rim, in inches, indicating that the diameter of the rim is 25 inches.
3. /3.5: usually refers to the width of the rim, in inches, indicating that the width of the rim is 3.5 inches.
This type of rim is mainly used to carry heavy loads and is suitable for use in harsh environments such as construction sites and mines. It is important to ensure that the tire and rim specifications match to ensure the safety and efficient operation of the equipment.
How to operate and use mining wheel loaders?
The operation of mining wheel loaders is similar to that of general wheel loaders, but because its working environment is more complex and the load is heavier, more attention to safety and details is required during operation. The following are the operating steps of mining wheel loaders:
1. Pre-operation inspection
Machine inspection: Check whether the fuel, hydraulic oil, coolant, brake system, tire pressure, etc. are within the normal range.
Safety inspection: Ensure that the rearview mirror, lighting system, alarm device and fire extinguisher function properly.
Rim and tire inspection: Check whether the rim and tire are damaged or abnormally worn to ensure safety.
2. Start and preparation
Get on the machine: Enter the cab through the safety ladder, make sure the seat belt is fastened, and adjust the seat, rearview mirror, etc. to the appropriate position.
Start the engine: Turn the key to the start position. After the indicators on the dashboard are normal, start the engine and let it idle for a few minutes to preheat the hydraulic system.
Check the system: After starting, check whether the hydraulic system, brake system and control handle are operating normally to ensure that there is no oil leakage, air leakage, etc.
3. Operation control
Movement operation:
Use the steering wheel to control the direction of the machine.
Use the accelerator pedal to accelerate and the brake pedal to decelerate.
The gearbox is usually automatic or semi-automatic, and the gear can be adjusted as needed.
Bucket operation:
Bucket lowering: Use the control lever to lower the bucket to the ground.
Shoveling: Move forward slowly, insert the front end of the bucket into the material, and lift the front of the bucket appropriately to ensure that the bucket is fully loaded.
Raise the bucket: When the bucket is fully loaded, lift the bucket and tilt it backward to prevent the material from falling.
Unloading: After reaching the unloading point, raise the bucket and tilt it forward to dump the material.
4. Precautions during operation
Load control: Do not overload the operation and ensure that the load of the bucket is within the allowable range of the equipment.
Speed control: When operating in a mine or in rough terrain, ensure that you drive at a low speed to avoid bumps and loss of control.
Vision check: Maintain a good field of vision and avoid operating in blind spots, especially in complex environments such as mines where there may be other equipment or personnel.
Slope operation: Try not to fill the bucket when going uphill to lower the center of gravity. Keep a low speed when going downhill and avoid sudden braking.
5. Parking and shutdown
Bucket placement: Before parking, make sure to lower the bucket to the ground to keep the machine stable.
Pull up the parking brake: After parking, pull the handbrake or parking brake to prevent the vehicle from sliding.
Turn off the engine: Shift the gear to neutral, turn off the engine, remove the key, and wait for the equipment to stop completely before leaving the cab.
Regular maintenance: After work every day, check tires, hydraulic systems, buckets, rims and other components, and perform necessary cleaning and maintenance.
6. Precautions in special environments
Mine environment: When working in a mine or narrow area, pay special attention to the surrounding environment to avoid collisions or sinking into soft foundations.
Bad weather: When operating in rain, snow or muddy environment, reduce the speed appropriately, keep the equipment stable and avoid slipping.
Avoid large machinery: When working in the mine, there may be other large equipment operating, always pay attention to the surrounding environment to avoid collision accidents.
By complying with the above operating steps and safety regulations, the mining wheel loader can complete the operation efficiently and safely, ensuring stable operation under adverse working conditions.
We can also produce the following different specifications and sizes of rims in mining vehicles:
| Mining dump truck | 10.00-20 | Rigid Dump truck | 15.00-35 |
| Mining dump truck | 14.00-20 | Rigid Dump truck | 17.00-35 |
| Mining dump truck | 10.00-24 | Rigid Dump truck | 19.50-49 |
| Mining dump truck | 10.00-25 | Rigid Dump truck | 24.00-51 |
| Mining dump truck | 11.25-25 | Rigid Dump truck | 40.00-51 |
| Mining dump truck | 13.00-25 | Rigid Dump truck | 29.00-57 |
| Underground mining | 10.00-24 | Rigid Dump truck | 32.00-57 |
| Underground mining | 10.00-25 | Rigid Dump truck | 41.00-63 |
| Underground mining | 19.50-25 | Rigid Dump truck | 44.00-63 |
| Underground mining | 22.00-25 | Dollies and Trailers | 25-11.25/2.0 |
| Underground mining | 24.00-25 | Dollies and Trailers | 33-13.00/2.5 |
| Underground mining | 25.00-25 | Dollies and Trailers | 13.00-33/2.5 |
| Underground mining | 25.00-29 | Dollies and Trailers | 35-15.00/3.0 |
| Underground mining | 27.00-29 | Dollies and Trailers | 17.00-35/3.5 |
| Underground mining | 28.00-33 | Dollies and Trailers | 25-11.25/2.0 |
| Wheel loader | 14.00-25 | Dollies and Trailers | 25-11.25/2.0 |
| Wheel loader | 17.00-25 | Dollies and Trailers | 25-13.00/2.5 |
| Wheel loader | 19.50-25 | Dollies and Trailers | 25-13.00/2.5 |
| Wheel loader | 22.00-25 | Grader | 8.50-20 |
| Wheel loader | 24.00-25 | Grader | 14.00-25 |
| Wheel loader | 25.00-25 | Grader | 17.00-25 |
| Wheel loader | 24.00-29 | Wheel loader | 25.00-29 |
| Wheel loader | 27.00-29 | Wheel loader | DW25x28 |
Our company is widely involved in the fields of engineering machinery, Mining Rims, forklift rims, industrial rims, agricultural rims, other rim components and tires.
The following are the various sizes of rims that our company can produce in other fields:
Engineering machinery sizes are: 7.00-20, 7.50-20, 8.50-20, 10.00-20, 14.00-20, 10.00-24, 10.00-25, 11.25-25, 12.00-25, 13.00-25, 14.00-25, 17.00-25, 19.50-25, 22.00-25, 24.00-25, 25.00-25, 36.00-25, 24.00-29, 25.00-29, 27.00-29, 13.00-33.
Mining sizes are: 22.00-25, 24.00-25, 25.00-25, 36.00-25, 24.00-29, 25.00-29, 27.00-29, 28.00-33, 16.00-34, 15.00-35, 17.00-35, 19.50-49, 24.00-51, 40.00-51, 29.00-57, 32.00-57, 41.00-63, 44.00-63.
Forklift sizes: 3.00-8, 4.33-8, 4.00-9, 6.00-9, 5.00-10, 6.50-10, 5.00-12, 8.00-12, 4.50-15, 5.50-15, 6.50-15, 7.00- 15, 8.00-15, 9.75-15, 11.00-15, 11.25-25, 13.00-25, 13.00-33.
Industrial vehicle sizes are: 7.00-20, 7.50-20, 8.50-20, 10.00-20, 14.00-20, 10.00-24, 7.00x12, 7.00x15, 14x25, 8.25x16.5, 9.75x16.5, 16x17, 13x15.5, 9x15.3, 9x18, 11x18, 13x24, 14x24, DW14x24, DW15x24, DW16x26, DW25x26, W14x28, DW15x28, DW25x28.
Agricultural machinery sizes are: 5.00x16, 5.5x16, 6.00-16, 9x15.3, 8LBx15, 10LBx15, 13x15.5, 8.25x16.5, 9.75x16.5, 9x18, 11x18, W8x18, W9x18, 5.50x20, W7x20, W11x20, W10x24, W12x24, 15x24, 18x24, DW18Lx24, DW16x26, DW20x26, W10x28, 14x28, DW15x28, DW25x28, W14x30, DW16x34, W10x38 , DW16x38, W8x42, DD18Lx42, DW23Bx42, W8x44, W13x46, 10x48, W12x48.
Our products have world quality.