Is there a difference between the wheels and rims of engineering equipment?
In engineering equipment, the concepts of Wheels And Rims are similar to those of conventional vehicles, but their uses and design features vary depending on the application scenarios of the equipment. Here are the differences between the two in engineering equipment:
1. Wheels of engineering equipment:
The wheels of engineering equipment refer to the entire wheel assembly, including the rims, tires (solid tires or pneumatic tires), hubs and other parts. Wheels bear important load and drive functions in engineering equipment and are usually designed to withstand extremely high loads and harsh working environments.
The design of engineering equipment wheels may have special anti-skid and anti-wear designs, and in some equipment, wheels may also include other components such as spokes and hub covers.
2. Rim of engineering equipment:
The rim of engineering equipment is a part of the wheel that is specifically used to support and fix the tire. The rims of engineering equipment are usually stronger than the rims of ordinary vehicles to withstand greater loads and harsher use conditions.
The design of the rim needs to take into account the close fit with the tire and the stability under high loads and high torques. The rims of construction equipment may be made of special alloys or steel to enhance their strength and durability.
Main differences:
Different scope: The wheel is the entire wheel assembly, including the rim, while the rim is only a part of the wheel.
Functional focus: The wheel as a whole is responsible for the travel, load-bearing and drive of the vehicle, while the rim is mainly responsible for supporting and fixing the tire.
Material and design requirements: In construction equipment, due to the need to cope with high loads and harsh environments, the materials and designs of wheels and rims pay more attention to strength and durability than ordinary vehicles.
Therefore, the basic concept of construction equipment wheels and rims is the same as that of ordinary vehicles, but there are more stringent requirements on design and materials.
We are China's No. 1 off-road wheel designer and manufacturer, and a world-leading expert in rim component design and manufacturing. All products are designed and produced according to the highest quality standards, and we have more than 20 years of experience in wheel manufacturing.
We have a wide range of rims for construction equipment, including wheel loaders, articulated trucks, graders, wheel excavators and many other models. We are the original rim supplier in China for well-known brands such as Volvo, Caterpillar, Liebherr, and John Deere.
We produce rims with a size of 36.00-25/1.5 for articulated trucks. The 36.00-25/1.5 rim is a three-piece structure rim for TL tires and can also be used on desert trucks.
What is an articulated truck?
An articulated truck, also known as an articulated heavy truck or articulated mining truck, is a large vehicle designed for heavy-duty transport and off-road operations. The main feature of this truck is that the body consists of two main parts, connected by an articulated device (i.e. hinge), which provides greater maneuverability and flexibility.
Main features of articulated trucks
1. Articulation:
The front and rear of an articulated truck are connected by an articulation that allows the truck to turn and twist a little while driving.
The articulation makes the vehicle more flexible in complex terrain (such as mud, slopes, etc.) and better able to cope with rugged ground.
2. Body structure:
Front (cab and front drive axle): usually contains the cab, engine and front drive axle.
Rear (cargo part): contains the area for loading cargo or the mining carriage, usually a double-wheel axle or multi-wheel axle structure.
3. High load capacity:
Due to the strength and durability of the design, articulated trucks can carry a large amount of cargo or ore.
Suitable for use in high-load environments such as mines, quarries, and construction sites.
4. Off-road performance:
Designed to cope with rugged and harsh terrain, with good off-road performance.
Large-diameter tires and a powerful suspension system allow the vehicle to operate stably on uneven ground.
5. Power system:
Usually equipped with a powerful engine to provide sufficient power to cope with heavy loads and difficult terrain.
The design of the front and rear drive axles provides good traction and stability.
Application of articulated trucks
1. Mines and quarries:
Used to transport ore, coal, stone, etc.
Suitable for complex terrain and high load requirements in mining areas.
2. Construction sites:
Used to transport building materials, sand, mud, etc.
Excellent performance in handling and transportation tasks at construction sites.
3. Forests and forestry:
Used to transport wood and other forestry products.
Able to cope with complex ground conditions in forest areas.
4. Heavy industry:
In some large industrial facilities, articulated trucks are used to carry heavy equipment and materials.
Advantages and disadvantages
Advantages:
High maneuverability: The articulated structure makes the vehicle more flexible in complex terrain.
High load-bearing capacity: Suitable for transporting heavy loads.
Excellent off-road performance: Able to operate stably in harsh environments.
Disadvantages:
Large turning radius: Although the articulated structure improves flexibility, turning in a small space is still limited.
Higher maintenance costs: The articulated device and complex power system may lead to higher maintenance costs.
Articulated trucks are designed to perform well in extreme working conditions, but their application scenarios and maintenance requirements need to be fully understood before use.
Below are the sizes of articulated trucks we can produce.
| Articulated hauler | 22.00-25 |
| Articulated hauler | 24.00-25 |
| Articulated hauler | 25.00-25 |
| Articulated hauler | 36.00-25 |
| Articulated hauler | 24.00-29 |
| Articulated hauler | 25.00-29 |
| Articulated hauler | 27.00-29 |
Our company is widely involved in the fields of mining rims, Forklift Rims, industrial rims, agricultural rims, other rim components and tires.
The following are the various sizes of rims that our company can produce for different fields:
Engineering machinery sizes: 7.00-20, 7.50-20, 8.50-20, 10.00-20, 14.00-20, 10.00-24, 10.00-25, 11.25-25, 12.00-25, 13.00-25, 14.00-25, 17.00-25, 19.50-25, 22.00-25, 24.00-25, 25.00-25, 36.00-25, 24.00-29, 25.00-29, 27.00-29, 13.00-33.
Mining sizes: 22.00-25, 24.00-25 , 25.00-25, 36.00-25, 24.00-29, 25.00-29, 27.00-29, 28.00-33, 16.00-34, 15.00-35, 17.00-35, 19.50-49, 24.00-51, 40.00-51, 29.00-57, 32.00-57, 41.00-63, 44.00-63.
Forklift sizes are: 3.00-8, 4.33-8, 4.00-9, 6.00-9, 5.00-10, 6.50-10, 5.00-12, 8.00-12, 4.50-15, 5.50-15, 6.50-15, 7.00 -15, 8.00-15, 9.75-15, 11.00-15, 11.25-25, 13.00-25, 13.00-33.
Industrial vehicle sizes are: 7.00-20, 7.50-20, 8.50-20, 10.00-20, 14.00-20, 10.00-24, 7.00x12, 7.00x15, 14x25, 8.25x16.5, 9.75x16.5, 16x17, 13x15.5, 9x15.3, 9x18, 11x18, 13x24, 14x24, DW14x24, DW15x24, DW16x26, DW25x26, W14x28 , DW15x28, DW25x28.
Agricultural machinery sizes are: 5.00x16, 5.5x16, 6.00-16, 9x15.3, 8LBx15, 10LBx15, 13x15.5, 8.25x16.5, 9.75x16.5, 9x18, 11x18, W8x18, W9x18, 5.50x20, W7x20, W11x20, W10x24, W12x24, 15x24, 18x24, DW18Lx24, DW16x26, DW20x26, W10x28, 14x28, DW15x28, DW25x28, W14x30, DW16x34, W10x38 , DW16x38, W8x42, DD18Lx42, DW23Bx42, W8x44, W13x46, 10x48, W12x48.
Our products have world-class quality.